K-Strut Support Systems

The Kounis Metal Industries K-Strut Support Systems were designed as a site adaptable mechanical support method; this product range complements almost any installation of Cable, Pipe, HVAC or general support structure.

The key to making any installation easy and ensuring performance of the final product is to ensure selection of the correct parts and finishes; below is some key information you may require to assist selection:

Product Finishes
Mild Steel post production Hot Dip Galvanised surface treatment to AS/NZS1365, AS1594 and AS/NZS4680 316 Grade Stainless Steel
Mild Steel post production Zinc Plated surface treatment to AS1789
Mild Steel Mill Finish NO surface treatment
Painted finish available on request.

Load Ratings
Allowable loading for the K-Strut product range is listed in tables located on the relating product page. All published slip out, pull out and load ratings have been derived by calculation based on ultimate load capacity prior to product failure taking into account a safety factor of 1.5.

K-Strut channel is typically used in either a support beam or support column arrangement.

Support Beam technical data lists maximum allowable uniform load and mid span deflection at a range of spans. Together with this data we have designated a loading to span which will give a deflection ratio of 1/200 of the span. This will give a recognized practical beam deflection to minimize sagging of the beam under load.

Support Column technical data lists maximum lateral loading at a range on unbraced heights.

Product Weights
All itemised product weights are located under the alpha numeric listing at the back section of this catalogue.